There is no slider selected or the slider was deleted.

Multiplexoare Optice

Familia de multiplexoare produse de Fibrain sunt special concepute ca solutii cu costuri eficiente pentru transportul canalelor E1, ISDN BRI sau E3 precum si date Ethernet pe link de fibra optica pana la o distanta de 240km.

Produsele Fibrain sunt capabile sa suporte o varietate larga de cerinte ale clientiilor, oferind capacitati de transport pana la 16 link-uri E1 si trei link-uri de Gigabit Ethernet pe un singur link de fibra optica cu 1+1 protectie si QoS, VLAN si functii de alimentare redundanta.

Multiplexoarele FIBRAIN pot fi folosite intr-o gama larga de aplicatii, incluzand servicii de transport 2G/3G sau WiMAX in aplicatiile celulare backhaul, asigurand comunicatii de voce si date sau aplicatii de transmisii de semnal telemecanic in sistemele de alimentare electrica.

Toate multiplexoarele optice sunt produse in Polonia!

multiplexoare optice


UTD-OM-T16

UTD-OM-T16 combines sixteen ITU-T G.703 compliant standard electrical E1 2048 kbit/s lines, three Gigabit Ethernet interfaces (four 10/100/1000Mbit/s RJ45 connectors and three 1000Mbit/s SFP slots) and Ethernet management channel into an optical data stream for transport over fiber optic.

Optical line interface is realized by two SFP ports. In case of using of both SFP slots one SFP module is used to transmit data and second one is used as line protection.

Ethernet ports are group into three logical interfaces. First one is a switch that consists of four 10/100/1000Mbit/s RJ45 ports and one 1000Mbit/s SFP port. Second and third ones are realized by single SFP ports. Summed Ethernet data stream throughput is up to 2.2Gbit/s (in case of 3.125Gbit/s transceivers).

SPECIFICATION DESIGNATION LOCAL INTERFACE LINE INTERFACE
Optical multiplexer 16xE1 G.703 2048kbit/s
2.2Gbit/s Ethernet / FO
with optical path redundancy
UTD-OM-T16 16xE1
Ethernet
2.2Gbit/s
FO
Optical multiplexer 16xE1 G.703 2048kbit/s
2.2Gbit/s Ethernet / FO with optical path
redundancy and LCD display
UTD-OM-T16-LCD 16xE1
Ethernet
2.2Gbit/s
FO
Optical add-drop multiplexer 16xE1 G.703 2048kbit/s +
1Gbit/s Ethernet / FO with connection protection
UTD-OM-T16-ADD 16xE1
Ethernet
1Gbit/s
FO
Special features:
  • Connection of three Gigabit Ethernet LANs with 16 E1 G.703 2048kbit/s lines through a fiber optical link
  • 3.125 Gbit/s optical interface with possibility of 1+1 protection
  • Built-in three Gigabit Ethernet interfaces (four 10/100/1000Mbit/s
  • RJ45 connectors and three 1000Mbit/s SFP slots
  • IEEE 802.1q, 802.1QinQ, 802.1p (QoS) support
  • Management: SNMP, WWW, TELNET, RS232 console
  • Redundant power supply
  • LCD display
Technical specification:
PARAMETERS
Ethernet Ports

  • Three Gbit Ethernet logical interfaces
  • 10/100/1000Mbit/s transmission (1000 Mbit/s for SFP ports)
  • Flow control function
  • „Autocrossover” MDI, MDI-X function
  • Supports QoS. VLAN (IEEE 802.1q,QinQ)
  • Proper connection signalling
  • 4 x RJ45 connector, 3 x SFP
  • Ethernet data stream – 2.2 Gbit/s
Optical line interface
  • SFP module
  • 3.125 Gbit/s transmission speed (2.5 Gbit/s optionally)
  • Possibility of 1+1 optical link protection (two optical interfaces)

Management

  • SNMP, Telnet, HTTP protocol and web browser
  • SMTP – send e-mail message in case of failure
  • Out of band, by dedicated Ethernet port
  • Through the RS232 console (RJ45,9600,N,8,1)
  • Implementation of G.826 for E1 and optical interfaces
  • LCD display for diagnostic purposes

Power

  • Two power supplies (36-60V DC and 230V AC)
  • Up to 25W power consumption

E1 line interfaces

  • 16E1 channels
  • ITU-T G.703
  • 2048 kbit/s 50 ppm binary throughput
  • 120 Ohm E1 impedance
  • Line code HDB-3
  • Connectors: 16 x RJ45

Dimensions

  • 483x170x44mm housing (1U, 19″)
  • Weight < 1.7kg

 

UTD-OM-T8

UTD-OM-T8 is a high performance optical line transmission equipment, combines eight ITU-T G.703 compliant standard electrical E1 2048 kbit/s lines, three Gigabit Ethernet interfaces (four 10/100/1000Mbit/s RJ45 connectors and three 1000Mbit/s SFP slots) and Ethernet management channel into an optical data stream for transport over fiber optic. Optical line interface is realized by two SFP ports. In case of using both SFP slots one SFP module is used to transmit data and second one is used as line protection.

SFP interfaces are designed for use with 3.125 Gbit/s or 2.5 Gbit/s data rate transceivers. Ethernet ports are grouped into three logical interfaces. First one is a switch that consists of four 10/100/1000Mbit/s RJ45 ports and one 1000Mbit/s SFP port. Second and third ones are realized by single SFP ports. Summed Ethernet data stream throughput is up to 2.2 Gbit/s (in case of 3.125 Gbit/s transceivers).

SPECIFICATION DESIGNATION LOCAL INTERFACE LINE INTERFACE
Optical Multiplexer, 8x E1
2.2 Gbit/s Ethernet / FO
with optical path redundancy
UTD-OM-T8 8xE1,
2.2Gbit/s
Ethernet
FO
Optical add-drop multiplexer 8xE1 G.703 2048 kbit/s
1 Gbit/s Ethernet / FO with connection protection
UTD-OM-T8-ADD 8xE1,
Ethernet
1Gbit/s
FO
Special features:
  • Connection of three Gigabit Ethernet LANs with?8 E1 G.703 2048kbit/s lines through a fiber optical link
  • 3.125 Gbit/s optical interface with possibility of 1+1 protection
  • Built-in three Gbit Ethernet interfaces (four 10/100/1000Mbit/s RJ45 and three 1000Mbit/s SFP slots)
  • IEEE 802.1q, 802.1QinQ, 802.1p (QoS) support
  • Management: SNMP, WWW, TELNET, RS232 console
  • Redundant power supply
Technical specification:
PARAMETERS

Ethernet Ports

  • 3Gbit Ethernet interfaces
  • Supports QoS, VLAN (IEEE 802.1q,QinQ)
  • Proper connection signalling
  • 4 x RJ45 connector, 3 x SFP
  • Ethernet data stream – 2.2 Gbit/s
Optical line interface

  • SFP module
  • 3.125 Gbit/s transmission speed (2.5 Gbit/s optionally)
  • 1+1 optical link protection

Power

  • Two power supplies (36-60V DC and 230V AC)
  • Up to 25W power consumption
E1 line interfaces

  • 8E1 channels 2048 kbit/s 50 ppm binary throughput
  • ITU-T G.703
  • 120 Ohm?E1 impedance
  • Line code HDB-3
  • Connectors: 8 x RJ45

Dimensions

  • 483x170x44mm housing (1U, 19″)
  • Weight < 1.7kg

UTD-OM-G4

UTD-OM-G4 is a high performance optical line transmission equipment, combines four ITU-T G.703 compliant standard electrical E1 2048 kbit/s lines plus 10/100/1000 Mbit/s?Ethernet signal into an optical data stream for transport over fiber optic. Ethernet transmission channel may be divided into independent transmission channels through the virtual VLAN mechanism. Up to 64 independent VLANs are supported.

UTD-OM-G4 supports advanced Ethernet interface features like VLAN stacking (QinQ, IEEE802.1ad), jumbo frame size (10K bytes), programmable rate limiting and port priority setting. Embedded HTTP server, TELNET server and SNMP agent allows free configuration of the device performance by standard Web browser and continuous monitoring from any management platforms equipped with SNMP client. In addition, built-in SMTP service daemon allows to notify the operator in case of system failure.

SPECIFICATION DESIGNATION LOCAL INTERFACE LINE INTERFACE
Optical Multiplexer, 4x E1
1Gbit/s Ethernet
WWW, Telnet, SNMP, CLI management
UTD-OM-G4-SFP 4xE1,
Ethernet
1Gbit/s
FO
Special features:
  • Gigabit Ethernet LAN with 4 E1 G.703 through a fiber optical link
  • Built-in 4-port Gigabit Ethernet switch
  • IEEE 802.1q and 802.1 Q in Q support
  • SNMP, WWW, SMTP, TELNET, SNTP management
  • Optical 1.25 Gbit/s SFP port
  • Possibility of defining up VLAN networks (single and multiple VLAN headers) in order to create independent transmission channels
Technical specification:
PARAMETERS

Ethernet Ports

  • 10/100/1000 Mbit/s
  • Supports VLAN/multiple VLAN, IEEE 802.1q,QinQ
  • 4 x RJ45 connector,
  • ?Flow control function

Multiplexing

  • Number of E1 channels-4
  • Throughput Ethernet data stream – 1000 Mbit/s

Optical line interface

  • ITU-T G.703
  • 120 Ohm E1 impedance
  • Line code HDB-3
  • Types of connectors: RJ45

Power

  • Supply voltage range 36-60V DC
  • Up to 15W power
  • External power supply included 230VAC/48VDC

E1 line interfaces

  • 4E1 channels 2048 kbit/s 50 ppm binary throughput
  • ITU-T G.703
  • 120 Ohm E1 impedance
  • Line code HDB-3

Dimensions

  • Housing 483x170x44mm (1U, 19′ version)
  • Weight < 1.7kg
  • Housing 103x230x53mm (standalone version)

UTD-OM-M16

UTD-OM-M16 is a high performance optical line transmission equipment, combines sixteen ITU-T G.703 compliant standard electrical E1 2048 kbit/s lines plus 10/100 Mbit/s Ethernet signal into an optical data stream for transport over fiber optic. Several transmitter options are available (including WDM version).

UTD-OM-M16 in base version is equipped with eight E1 interfaces. It is possible to install additional two 4xE1 modules to extend it’s capabilities. Is equipped with advanced built-in 4-port Ethernet switch with „flow control” and „auto crossover” mechanisms. Each Ethernet port supports programmable rate limiting from 64kbit/s to 100 Mbit/s and port priority setting. Ethernet transmission channel may be divided into fifteen independent transmission channels through the virtual VLAN mechanism.

SPECIFICATION DESIGNATION LOCAL INTERFACE LINE INTERFACE
Optical multiplexer 16xE1 G.703 2048kbit/s
100Mbit/s, Ethernet, 19″
(Base version equipped with 8x E1)
SNMP, WWW, Telnet management
UTD-OM-M16 16xE1
Ethernet
10/100Mbit/s
FO
4xE1 card for UTD-OM-M16 UTD-OM-M16-4ECARD 16xE1
Ethernet
2.2Gbit/s
FO
Special features:
  • Connection of LAN Ethernet with 10/100 Mbit/s + 16 E1 G.703 2048 kbit/s lines through a fiber optical link
  • Built-in 4-port Ethernet &switch with an array of 1000 MAC addresses
  • Possibility of limiting of the Ethernet ports
  • Maintenance and management: WWW, TELNET, SNMP, RS232 serial port
  • Out of band local and remote management, dedicated management Ethernet port
  • Local and remote loop back test for E1 channels
Technical specification:
PARAMETERS

Ethernet Ports

  • Baud rate 10/100Mbit/s
  • Flow control function
  • Support for VLAN, IEEE 802.1q
  • Connection state signalling
  • 4 x RJ45 connector

Power

  • Supply voltage range 36 to 60V DC
  • 10W power consumption
  • Optional external power supply: 230VAC/48VDC

Optical line interface

  • 155Mbit transmission speed
  • SC/PC connectors
  • SM,MM,WDM, depending on the type of optical port
  • Ranges depending on the type of optical port: 15km, 50km, 120km (1550nm), 20km WDM, 40km WDM, 60km WDM, 100km WDM, 300m (POF)

E1 line interfaces

  • Number of E1 channels-16, ITU-T G.703
  • 2048 kbit/s 50 ppm binary throughput
  • 120 Ohm E1 impedance
  • Line code HDB-3

Dimensions

  • 483x170x44mm housing
  • Weight < 1.7kg

 

UTD-OM-M8

UTD-OM-M8 is a high performance optical line transmission equipment, combines eight ITU-T G.703 compliant standard electrical E1 2048 kbit/s lines plus 10/100/1000Mbit/s Ethernet signal (100Mbit/s maximum Ethernet data stream throughput) into an optical data stream for transport over fiber optic. Several transmitter options are available (including WDM version, with SFP module and with 1+1 optical path redundancy). Ethernet transmission channel may be set as transparent or divided into independent transmission channels through the virtual VLAN mechanism. Up to 64 independent VLANs are supported.

UTD-OM-M8 supports advanced Ethernet interface features like VLAN stacking (QinQ, IEEE 802.1ad), jumbo frame size (10K bytes), programmable rate limiting and port priority setting (depending on default port priority, VLAN priority, IP DSCP/TOS field or MAC destination/source address).

SPECIFICATION DESIGNATION LOCAL INTERFACE LINE INTERFACE
Optical Multiplexer 8x E1 G.703&2048kbit/s
1000 Mbit/s Ethernet
UTD-OM-M8 8xE1,
10/100/1000Mbit/s
Ethernet
FO

multiplexor optic

Special features:
  • Connection of Gigabit Ethernet LAN + 8xE1
  • G.703 2048kbit/s lines through a fiber optical link
  • Built-in?4-port Gigabit Ethernet?switch with QoS and VLAN (802.1q and 802.1QinQ) support
  • Possibility of limiting bandwidth of the Ethernet ports („leaky bucket”)
  • Management: SNMP, WWW, TELNET, RS232 console
  • Optional 1+1 fiber path protection and power supply redundancy

 

Technical specification:
PARAMETERS

Ethernet Ports

  • 10/100/1000 Mbit/s transmission speed
  • Flow control function
  • QoS, VLAN (IEEE 802.1q, QinQ) mechanism supports
  • Connection state&signalling
  • 4 x RJ45 connector

Optical line interface

  • 155Mbit/s transmission
  • SC/PC connectors
  • ?SM,MM,WDM,1310nm, 1550nm, 665nm (POF)
  • Fiber type 9/125um, 62.5/125um, 980/1000um

Power

  • Supply voltage range 36 to 60V DC
  • Up to 10W power consumption
  • External power supply included 230VAC/48VDC

E1 line interfaces

  • 2048 kbit/s 50 ppm binary throughput
  • ITU-T G.703
  • 120 Ohm E1 impedance
  • Line code HDB-3
  • Types of connectors: RJ45

Dimensions

  • 483x170x44mm housing (1U, 19″)
  • Weight < 1.7kg

 

UTD-OM-O

UTD-OM-O is a high performance optical line transmission equipment, combines four ITU-T G.703 compliant standard electrical E1 2048 kbit/s lines, 10/100 Mbit/s?Ethernet signal?plus optionally RS422/485 serial data transmission into an optical data stream for transport over fiber optic. Several transmitter options are available (including WDM version and with SFP module).

UTD-OM-O is equipped with advanced built-in 4-port Ethernet switch. Ethernet transmission channel may be set as transparent or divided into independent transmission channels through the virtual VLAN mechanism. Each Ethernet port supports programmable rate limiting from 64kbit/s to 100Mbit/s and port priority setting (depending on default port priority, VLAN priority or IP DSCP/TOS), as well as „flow control” and „autocrossover” mechanisms.

SPECIFICATION DESIGNATION LOCAL INTERFACE LINE INTERFACE
Fiber optical multiplexer 4xE1 G.703 2048kbit/s
100Mbit/s Ethernet
WWW, Telnet, SNMP, CLI management
UTD-OM-O 4xE1,
Ethernet
10/100Mbit/s
FO
Fiber optical multiplexer 4xE1 G.703 2048kbit/s
100Mbit/s Ethernet + RS422/485
WWW, Telnet, SNMP, CLI management
UTD-OM-O-RS 4xE1,
Ethernet
10/100Mbit/s
RS422/485
FO

 

Special features:
  • Connection of LAN Ethernet 10/100 Mbit/s +4 E1 G.703 lines + optionally RS422/485 serial data transmission through a fiber optical link
  • Built-in 4-port Ethernet switch with an array of 1000 MAC addresses
  • IEEE 802.1q. Possibility of defining up to 15 VLAN networks (full range VID)
  • Maintenance and management: WWW, Telnet, SNMP, RS232 serial port
  • QoS support (depending on default port priority, VLAN priority, IP DSCP field)
  • Optional power supply redundancy
Technical specification:
PARAMETERS
Ethernet Ports

  • Baud rate 100/10Mbit/s
  • Flow control function
  • Autocrossover function „MDI, MDI-X
  • Support for VLAN, IEEE 802.1q, QoS, IEEE 802.1p
  • Connection state signalling

Power

  • Two power supplies (36-60V DC and 230V AC)
  • Up to 25W power consumption
Optical line interface

  • 155Mbit/s transmission
  • Fiber type 9/125um, 62.5/125um, 980/1000um

RS 422/485 serial interface(UTD-OM-O-RS)

  • Connectors: 1xRJ45
  • Max. rate transmission to: 256kbit/s
  • Stop bits: 1, parity: none
E1 line interfaces

  • 2048 kbit/s 50 ppm binary throughput
  • ITU-T G.703
  • 120 Ohm?E1 impedance
  • Line code HDB-3
  • Types of connectors:RJ45

Dimensions

  • Housing 483x170x44mm?(1U, 19′ version)
  • Weight < 1.7kg

multiplexor optic fibra optica