There is no slider selected or the slider was deleted.

Module SFP Transceivers (Small Form Factor)

modul optic sfp

SFP Transceivers (Small Form Factor)

This kind of transceivers (also called miniGBIC) is used in networks based on Ethernet, Sonet, SDH, Fiber Channel, CPRI, OBSAI?technologies. It was introduced to the market in 2001 as a successor of GBIC module. Compact size, low power consumption and optional optical diagnostic interface decided about popularity of those modules. Thanks to small dimensions port density was dramatically increased on host devices which had great impact on cost per port. Devices which are using SFP modules offers great flexibility in port configuration, they are salable and upgrade able.

Transmission speed Connector Transmission medium Transmission distance Technology
125Mbps ~ 4.25Gbps LC Duplex
LC Simplex
SC Simplex
RJ45
Copper cable
Multi-mode fiber
Single-mode fiber
Up to 160km Dual fiber
WDM (BiDi)
CWDM
DWDM
RJ45
Actual parameters may vary depending on transceiver model, please check datasheet for details

SFP modules also offers special feature, so called Digital Diagnostic Monitor Interface / Digital Optical Monitoring (or DDMI?/ DOM for short). This feature allows host devices (and by that the network administrators) for monitoring of some parameters of optical modules: supply voltage, transmitter output power, receiver input power, module temperature, laser bias current in real-time. Long-term analysis of those parameters can help network administrators in prediction and avoidance of oncoming failures.

Transceiver can be prepared as compatible with: Cisco, HP, Netgear, Avaya, D-Link, Brocade, Extreme Networks, Huawei, Enterasys, 3Com, Alcatel-Lucent and other. To confirm compatibility please contact technical support before ordering.


Gigabit Ethernet Single Fiber SFP

BIDI Gigabit Ethernet Single Fiber SFP

Gigabit Ethernet Single Fiber SFP

WDM technology the SFP modules can offer bidirectional data transmision over single strain of single-mode fiber. ?Less fibers needed for full duplex link can bring huge cost savings (especially when fibers are leased from other companies). Most commonly used wavelengths are: 1310nm, 1490nm, 1550nm. Those modules are available in various hardware versions (for more details please check datasheets or contact support department). Modules are compliant with Gigabit Ethernet and Fiber Channel technologies. Some network devices can use those modules in Fast Ethernet mode.

FTS-S12G-BXXZ-YYY

XX – denotes wavelength: (35 – 1310/1550nm, 45 – 1490/1550nm, 54 – 1550/1490nm , 53 – 1550/1310nm)

Z – denotes receptable type: (S – SC Simplex, Y – LC Simplex)

YYY – denotes distance: (005 – 5km, 020 – 20km, 040 – 40km, 070 – 70km, 080 – 80km, 120 – 120km)

Specificatii tehnice SFP Gigabit Ethernet Single Fiber


SFP Dual Fiber Gigabit Ethernet

 

Gigabit Ethernet Dual Fiber SFP modules are widely used in all kind of telecommunication networks. Devices with SFP ports offers flexible port configurations. This kind of optical modules are really cheap and fully compliant with SFP MSA specifications. Transceivers are compliant with Gigabit Ethernet and Fiber Channel technologies. Some network devices can use those modules in Fast Ethernet mode.

FTS-Z12G-SXXL-YYY

XX – denotes wavelength: (31 – 1310nm, 55 – 1550nm, 85 – 850nm)

YYY – denotes distance: (10M – 100m, 55M – 550m, 002 – 2km, 020 – 20km, 040 40km, 80 80km, 120 – 120km, 160 – 160km)

Z – denotes type of medium: (C Copper, M – MultiMode, S – SingleMode)

For details please check datasheets or contact support department.

Specificatii tehnice Gigabit Ethernet Dual Fiber


Fast Ethernet Single Fiber

Modul SFP Fast Ethernet Single Fiber

Modul SFP Fast Ethernet Single Fiber

Thanks to adoption of WDM technology the SFP Fast Ethernet modules can offer bidirectional data transmission over single strain of single-mode fiber. ?Less fibers needed for full duplex link can bring huge cost savings (especially when fibers are leased from other companies). Most commonly used wavelengths are: 1310nm,1550nm. Those modules are available in various versions:

FTS-V01M-BXXZ-YYY

XX – denotes wavelength: (35 – 1310/1550nm, 53 – 1550/1310nm)

Z – denotes receptable type: (S – SC Simplex, Y – LC Simplex )

YYY – denotes distance: (002 – 2km, 020 – 20km, 040 – 40km, 080 – 80km)

V – denotes type of medium: (M – MultiMode, S – SingleMode)

For details please check datasheets or contact support department.

Specificatii Tehnice SFP Fast Ethernet Single Fiber


 

Fast Ethernet Dual Fiber

Modul SFP Fast Ethernet Dual Fiber

Modul SFP Fast Ethernet Dual Fiber

Fast Ethernet Dual Fiber modules are widely used in all kind of telecommunication networks. Devices with SFP ports offers flexible port configurations. This kind of optical modules are really cheap and cover speeds up to 155Mbps. Modules is fully compliant with SFP MSA specifications and supports Optical Monitoring – a digital diagnostic interface (DOM, DDMI) which allows a network administrator to monitor module parameters such as: transmitted and received optical power, temperature.

FTS-Z01M-SXXL-YYY

XX – denotes wavelength: (31 – 1310nm, 55 – 1550nm)

YYY – denotes distance: (002 – 2km, 020 – 20km, 040 40km, 80 80km)

Z – denotes type of medium: (M – MultiMode, S – SingleMode)

For details please check datasheets or contact support department.

Specificatii SFP Fast Ethernet Dual Fiber


Gigabit Ethernet CWDM/DWDM

Modul SFP Gigabit Ethernet CWDM/DWDM

Modul SFP Gigabit Ethernet CWDM/DWDM

CWDM and DWDM SFP transceivers are widely used by companies which lease optical fibers, alternatively they also can be used to upgrade existing networks (by multiplying capacity of already installed optical cables without need for adding new ones). Thanks to optical multiplexing technology it is possible to send many separate data streams (channels) over same strain of fiber. Optical ?(CWDM or DWDM)?multiplexers and de-multiplexers are needed at the ends of each fiber to extract/add particular channels and guide them to/from the appropriate connectors. Usage of such CWD/DWDM transceivers can bring huge savings on the long-term basis. CWDM technology offers up to 18 channels, while DWDM brings up to 72 channels.

FTS-S12G-ZXXL-YYB

YY – denotes guaranteed power budget: (24 – 24dB, 28 – 28dB, 32 – 32dB, 36 – 36dB, 41 41dB)

Z – denotes type of WDM: (C CWDM, D – DWDM)

XX -? in CWDM modules denotes wavelengths available to choose from [nm]: (27~61 – 1270~1610nm )

XX -? in DWDM modules denotes channel number of DWDM 100GHz grid

For details please check datasheets or contact support department.

Gigabit Ethernet CWDM-DWDM


Modul SFP Multirate Single Fiber

Modul SFP Multirate Single Fiber

Multirate SFP Single Fiber modules can provide data transmission at rate from 125Mbps to 2.5Gbps. Transceivers support Fiber Channel Technology and they supports applications like SONET OC-3, OC-12, OC-24, OC-48 SDH STM 1,4,16 and also OTN. These modules supports Optical Monitoring – a digital diagnostic interface (DOM, DDMI) which allows a network administrator to monitor module parameters such as: transmitted and received optical power, temperature. Transceivers are fully compliant with SFP MSA specifications.

Thanks to adoption of WDM technology the Multirate SFP modules can offer bidirectional data transmision over single strain of single-mode fiber. ?Less fibers needed for full duplex link can bring huge cost savings (especially when fibers are leased from other companies). Most commonly used wavelengths are: 1310nm, 1490nm, 1550nm. Those modules are available in various versions:

FTS-R25G-BXXY-YYYD

XX – denotes wavelength: (35 – 1310/1550nm, 45 – 1490/1550nm, 53 – 1550/1310nm, 54 – 1550/1490nm, )

YYY – denotes distance: (020 – 20km, 040 – 40km, 080 – 80km)

For details please check datasheets or contact support department.

Specificatii tehnice SFP Multirate Single Fiber


 

Multirate Dual Fiber SFP

Multirate Dual Fiber SFP

Multirate SFP Dual Fiber modules can provide data transmission at rate from 125Mbps to 4.25Gbps. Transceivers support Fiber Channel Technology and they supports applications like SONET OC-3, OC-12, OC-24, OC-48, SDH STM 1,4,16. These modules supports Optical Monitoring – a digital diagnostic interface (DOM, DDMI) which allows a network administrator to monitor module parameters such as: transmitted and received optical power, temperature. Transceivers are fully compliant with SFP MSA specifications and it is available in various versions:

FTS-RZZG-SXXL-YYYD

XX – denotes wavelength: (31 – 1310nm, 55 – 1550nm, 85 – 850nm)

YYY – denotes distance: (15M 150m, 30M – 300m, 002 – 2km, 004 – 4km, 010 – 10km, 030 30km, 040 40km, 055 55km, 080 80km, 090 90km, 115 115km)

ZZ – denotes speed: (21 – 2.125Gbps, 27 – 2.67Gbps, 42 4.25Gbps)

 

For details please check datasheets or contact support department.

Specificatii tehnice SFP Multirate Dual Fiber


Multirate CWDM/DWDM

Modul SFP Multirate CWDM/DWDM

Modul SFP Multirate CWDM/DWDM

Multirate SFP CWDM/DWDM modules can provide data transmission at rate from 125Mbps to 4.25Gbps. Transceivers support Fiber Channel Technology and they supports applications like SONET OC-3, OC-12, OC-24, OC-48 SDH STM 1,4,16 and also OTN. These modules supports Optical Monitoring – a digital diagnostic interface (DOM, DDMI) which allows a network administrator to monitor module parameters such as: transmitted and received optical power, temperature. Transceivers are fully compliant with SFP MSA specifications.

CWDM and DWDM Multirate SFP transceivers are widely used by companies which lease optical fibers, alternatively they also can be used to upgrade existing networks (by multiplying capacity of already installed optical cables without need for adding new ones). Thanks to optical multiplexing technology it is possible to send many separate data streams (channels) over same strain of fiber. Optical (CWDM or DWDM)?multiplexers and demultiplexers are needed at the ends of each fiber to extract/add particular channels and guide them to/from the appropriate connectors. Usage of such CWDM/DWDM tranceivers can bring huge savings on the long-term basis. CWDM technology offers up to 18 channels, while DWDM brings up to 72 channels.

FTS-RAAG-ZXXL-YYBD

YY – denotes guaranteed power budget: (18 – 18dB, 28 – 28dB, 32 – 32dB)

Z – denotes type of WDM: (C CWDM, D – DWDM)

AA – denotes speed: (27 – 2.67Gbps, 42 4.25Gbps)

 

XX -? in CWDM modules denotes wavelengths available to choose from [nm]: (27~61 – 1270~1610nm )

XX -? in DWDM modules denotes channel number of DWDM 100GHz grid

For details please check datasheets or contact support department at comercial@kronect.ro

Multirate CWDM-DWDM